Chiropractic Billing Codes: CPT, ICD-10, and Modifiers
By Robert Del Grande · November 13, 2026 · 7 min read
The short answer
Chiropractic billing codes cover two code sets: CPT codes for the exam and the spinal manipulation (98940 to 98943, plus the E/M codes for a separate visit), and ICD-10 codes for the diagnosis that supports medical necessity (M54, M99, M25, and similar). Chiropractors file on the CMS-1500 claim form, the same form medical practices use, and most denials trace back to a region count that does not match the code, a missing AT modifier, or a diagnosis that does not support the visit.
These codes are not one list. They are two lists that have to work together: the CPT code for what the doctor did, and the ICD-10 code for why. A claim needs both, and they have to agree. Here is how the codes break down, what the modifiers mean, and where most chiropractic claims get stuck in a denial.
A chiropractic claim uses two kinds of codes together. The CPT code, most often 98940, 98941, 98942, or 98943, tells the payer how many spinal regions the doctor treated with manual manipulation during that visit. The ICD-10 code, usually from the M54, M99, or M25 category, tells the payer why the manipulation was medically necessary for that patient. Medicare and most commercial payers also expect the AT modifier on the CPT code when the treatment is active or corrective care, not maintenance care.
Chiropractors file these codes on the CMS-1500 claim form, the same form a family practice, cardiology, or endocrinology office uses, because chiropractic manipulation runs through the medical side of insurance, not the dental side. Getting the region count, the modifier, and the diagnosis code to agree with each other is what keeps a chiropractic claim out of the denial queue and moving toward payment.
Chiropractic Billing Codes: CPT Codes for the Visit
The CPT codes a chiropractic office bills most often are built around how many spinal regions got treated in one visit, not how many separate adjustments happened.
- 98940: Chiropractic manipulative treatment (CMT), spinal, 1 to 2 regions
- 98941: CMT, spinal, 3 to 4 regions
- 98942: CMT, spinal, 5 regions
- 98943: CMT, extraspinal, 1 or more regions (the extremities, the rib cage, the abdomen)
The five spinal regions a payer counts are the cervical, thoracic, lumbar, sacral, and pelvic regions. The code has to match the number of regions the note describes, not the number the doctor remembers treating.
An office visit code (99202 through 99215, depending on whether the patient is new and how much the visit involves) only gets billed when the visit is a separate, identifiable service from the adjustment itself. Modifier 25 goes on the E/M code to tell the payer it was distinct from the manipulation billed the same day.
You can look up any of these codes in a medical procedure code guide and check the modifier rules the payer publishes before the claim goes out. For the complete list, with every modifier a chiropractic claim might need, see the full list of chiropractic CPT codes and modifiers.
Chiropractic Medical Billing Codes: Why They Use the Medical Claim Form
Dental offices file on the ADA dental claim form. Chiropractors file chiropractic medical billing codes on the CMS-1500, the same claim form a family practice, cardiology, or endocrinology office uses. That is because spinal manipulation sits inside the CPT code set used across medical billing services, not inside the CDT code set dentistry uses. A biller who already works with medical coding services for another specialty can usually pick up chiropractic coding without starting over, because the claim form, the modifier logic, and the way a payer adjudicates the claim work the same way.
ICD-10 Codes That Support the Visit
The CPT code says what happened. The ICD-10 code says why it was necessary, and payers check that the two agree before they pay.
The categories chiropractic offices use most are:
- M54: dorsalgia, the back pain codes (cervicalgia, thoracic back pain, low back pain, and similar, each with its own fourth and fifth character)
- M99: biomechanical lesions, often described as segmental or somatic dysfunction (the category closest to what used to be called subluxation)
- M25: joint pain and stiffness not classified elsewhere
A diagnosis code has to describe the condition in the chart note, in the region the CPT code says was treated. A claim for 98941 (3 to 4 regions) paired with a single cervicalgia code and nothing else in the note is a mismatch a payer can catch on the first read.
CMS Chiropractic Billing Guidelines
Medicare pays for chiropractic manipulative treatment only when it corrects a subluxation of the spine. The documentation has to show the specific regions involved, the patient's condition before and after treatment, and a treatment plan with a goal, not just a note that says the patient was adjusted.
Medicare also separates active or corrective care from maintenance care. Active care gets the AT modifier. Maintenance care, where the patient is not improving further but the doctor still treats to keep the condition from getting worse, is not a Medicare-covered benefit, and the claim needs the GA or GZ modifier along with an Advance Beneficiary Notice on file, or Medicare denies it as a contractual write-off instead of patient responsibility.
Most commercial payers follow some version of the same logic: active treatment pays, maintenance does not, and the chart note has to show which one happened.
Where Coding Errors Turn Into Denials
The same few mistakes show up on chiropractic claims again and again:
- The CPT code lists more regions than the note documents.
- The AT modifier is missing on active treatment, or left on a claim that is really maintenance care.
- An E/M code is billed the same day as manipulation without modifier 25, or with it but no separate complaint in the note to support it.
- The diagnosis code does not match the region the CPT code says was treated.
- A payer's own coverage policy excludes a diagnosis the office did not check before billing.
Good documentation starts before the first adjustment. See what the intake form should capture for a new chiropractic patient, since the regions, the complaint, and the history recorded on day one are what the coder and the payer both check against later.
How Chiropractic Codes Get Checked Before a Claim Goes
The doctor picks the CPT code and the diagnosis code for every visit. That does not change. What we built is a check that runs before the claim leaves the office: does the region count on the CPT code match the regions in the note, is the AT modifier where it needs to be, is there a diagnosis code that supports the visit. A code that does not belong with another code, or a modifier that is missing, gets flagged before the claim goes out, not after the payer denies it.
Chiropractic claims go out on the CMS-1500, built in the Valian dashboard and sent electronically, and every claim gets reviewed before it goes. See how this fits into full chiropractic billing services, from the coding check to claim follow-up. If your office already pays someone else to handle this, you can see how outsourcing chiropractic billing actually works, including what changes and what does not.
Your billing, streamlined in our software. Keep managing it yourself, or have us take it over.
If you want to see how the coding check works on your own claims, Book a discovery call.