Chiropractic Coding Guidelines: CPT, ICD-10, Modifiers
By Robert Del Grande · November 19, 2026 · 7 min read
The short answer
Chiropractic coding guidelines set the CPT code for the visit (98940, 98941, or 98942, based on how many spinal regions were treated), the modifier Medicare requires for active care, and the ICD-10 code that has to match the region billed. Get any one of the three wrong and the claim comes back denied or down coded. This guide covers the codes, the modifiers, and the CMS rules behind them.
Chiropractic coding guidelines start with three pieces that have to agree with each other: the CPT code for the visit, the modifier that tells the payer what kind of care it was, and the ICD-10 code that backs up why the visit was medically necessary. Get one piece wrong and the claim usually comes back denied or paid at a lower rate than billed. This guide walks through the codes a chiropractic office actually uses, the modifier rules Medicare and most commercial payers follow, and where billers see claims get rejected.
Chiropractic coding guidelines set three things: the CPT code for the visit, the modifier that tells the payer what kind of care it was, and the ICD-10 code that backs up why the visit was medically necessary. A chiropractic manipulative treatment (CMT) visit is billed with one of three CPT codes: 98940 for one to two spinal regions, 98941 for three to four regions, and 98942 for five regions. Medicare requires the AT modifier on a CMT claim when the care is active or corrective treatment, not maintenance. The ICD-10 code has to point to the same spinal region that was treated and billed, not a general back pain code. A claim with the wrong CMT code for the regions treated, a missing AT modifier, or a diagnosis code that does not match the region billed is one of the most common reasons chiropractic claims get denied or down coded.
Chiropractic Coding Guidelines for CMT Codes
The CPT code for a chiropractic adjustment is not picked by how many joints the doctor touched. It is picked by how many spinal regions were manipulated. Medicare and most payers count five spinal regions: cervical, thoracic, lumbar, sacral, and pelvic. If a patient's chart note documents work in the cervical and thoracic regions, that is two regions, and the code is 98940. Three or four regions moves the claim to 98941. All five regions is 98942. The region count on the claim has to match what the doctor wrote in the note for that visit, not what was billed the last time the patient came in.
For the extremities, ribs, or the temporomandibular joint, the code is 98943, not one of the three spinal CMT codes. Offices that bill 98943 alongside a spinal CMT code on the same visit usually need documentation that shows both areas were treated and medically necessary on their own. For the full list of codes chiropractic offices bill, including the less common ones, see this breakdown of chiropractic CPT codes and what each one covers.
CMS Guidelines: The AT Modifier and Medical Necessity
Medicare covers manual manipulation of the spine to correct a subluxation. It does not cover maintenance care, and that line is where most chiropractic denials start. The AT modifier tells Medicare the visit was active or corrective treatment, with a documented treatment plan and expected improvement. Leave it off a claim that should have it, and Medicare pays nothing. Put it on a claim for maintenance care, and the practice is billing Medicare for a service it does not cover.
The chart note has to support the modifier. CMS wants to see the region treated, evidence of the subluxation by exam finding or imaging, and a plan with a goal, not just "adjustment, same as last visit." An initial visit needs more: history, exam findings by region, and the treatment plan that everything after it refers back to. Offices that keep that documentation consistent from the first visit forward have fewer AT modifier denials later.
ICD-10 Codes Chiropractors Use Most
The ICD-10 code on a chiropractic claim has to name the same region as the CPT code. Segmental and somatic dysfunction codes, M99.00 through M99.05, cover the head, cervical, thoracic, lumbar, sacral, and pelvic regions in that order, and they are the codes most CMT claims pair with. Region-specific pain codes, like M54.50 for low back pain or M53.82 for cervicothoracic pain, often ride alongside the M99 code to support medical necessity, not replace it.
A claim that bills 98941 for three to four regions but only carries one M99 code for a single region is a mismatch a payer can flag on its own, before a human reviewer even looks at the chart. The coding and the billing have to tell the same story across the whole claim. For a closer look at how the codes, modifiers, and diagnosis pointers line up on one claim, see this guide to chiropractic billing codes, CPT, ICD-10, and modifiers.
Modifiers That Pair With Chiropractic Claims
Beyond AT, a few other modifiers show up often on chiropractic claims. Modifier 25 goes on an E/M code (992xx) billed the same day as a CMT code, and only when the visit included a separate, documented evaluation, not just the standard pre-adjustment check. Modifier 59 marks a procedure as distinct from another service billed the same day, often used when extraspinal manipulation (98943) is billed alongside a spinal CMT code. GA and GY modifiers come up when a service is expected to be denied as maintenance care and the patient has signed an Advance Beneficiary Notice.
Missing or misusing any of these is one of the fastest ways to turn a clean claim into a denial. A full walkthrough of when each one applies is in this guide to chiropractic billing modifiers, AT, 25, 59, and GP.
How Valian Checks Chiropractic Codes Before the Claim Goes
The doctor picks the CPT code, the modifier, and the ICD-10 code for each visit. What Valian does is check that work before the claim leaves the office: does the region count on the CPT code match the regions in the note, is the AT modifier missing where it should be there, does the diagnosis code point to the same region as the procedure code. That review happens inside the same dashboard where the claim gets built, which is the same system behind our chiropractic billing services.
Because chiropractic claims use the same CMS-1500 form as family practice, cardiology, and endocrinology claims, that review runs on the same coding logic our medical coding services team applies across specialties. The claim itself is built in the Valian dashboard and sent electronically, and every claim gets reviewed before it goes out, whether the office is running its own billing in Valian or has our team running it for them. For the full code set behind a claim, including the HCPCS codes some payers still want on durable equipment, our CPT and HCPCS code guide covers both.
A denied chiropractic claim still needs a human to read the reason and fix it. Valian shows the payer's denial reason and the fix next to the claim, and the office resubmits once the coding is corrected.
Chiropractic coding guidelines only matter if the claim they produce actually gets checked before it is sent, not after a denial comes back. Your billing, streamlined in our software. Keep managing it yourself, or have us take it over. See how the coding review and claim build work for your office. Book a discovery call.